Palm fruit oil press machine /palm oil pressing machine

The introduction of palm fruit oil press machine /palm oil pressing machine:

Palm fruit oil press machine to produce pure and assured edible oil. The whole cooking oil expelling process is visible and needs only about 5-7 minutes; Palm fruit oil expeller is quite suitable to individual households and small oil mills in the countryside due to its little room occupancy and high pressingspeed.It is available to palm fruit,sesame,walnut kernels, pumpkin seeds, kiwi seeds,tea seeds and almonds,etc.
 

Palm fruit oil press machine

The advantage of palm fruit oil press machine
1.High oil yield
2.Physical squeeze--It is cold press not destroy seeds organic composition
3.Get pure oil, less impurity in the oil.
4.Automatic, high effiency.---from put seed in the machine to get oil just need 7-8 minutes. One person can operate 3-4 sets of machine.

Other information:
Skype:sophia.zang1
Mobile:+86 158 3826 3507
Phone:+86-371-5677 1823
Website:www.palmoilextractionmachine.com
E-mail: palmoil@doingmachinery.com  chat online

Palm oil mill process/ palm oil processing machine

Palm oil mill process introduction:
1.Weighing of palm oil mill process.Palm fruit into the factory after truck weighing,ease of production costing and after the settlement.
2.Loading ramp of palm oil mill process.FFB after a ramp sieved to remove impurities into the transport machinery delivery to sterilization tank.
3.Sterilization of palm oil mill process.The use of high temperatures to cook soft fruit bunches and sterilization (145 ℃ ,90-120 minutes), easy to separate fruit bunches fruit, soft fruit, increasing the humidity of the fruit.
4.Threshing of palm oil mill process.FFB has softened in sterilization process.After machine and screening beating off the fruit,palm fruit and empty fruit bunches (EFB) separation.
5.Empty fruit bunches.After delivery hoarding,EFB shipped orchard as fertilizer or fuel,it can also be used for other purposes.
6.Crushing of palm oil mill process.Fruit is broken through mash tank mixing and extrusion.
7.Pressing of palm oil mill process.The crushed fruit screw extrusion leaching by the press.

Palm oil mill process

Other information:
Skype:sophia.zang1
Mobile:+86 158 3826 3507
Phone:+86-371-5677 1823
Website:www.palmoilextractionmachine.com
E-mail: palmoil@doingmachinery.com 

chat online

What is palm oil?

Red palm oil

What is palm oil?
Palm oil is the most widely-used vegetable oil in the world. Palm fruit oil, generally known as palm oil, is produced from the pulp of the fruit of the oil palm tree (Elaeis Guineensis). This tropical fruit is reddish in colour because of a high beta-carotene content. The fruit is about the size of a large olive. The fruit has a single seed or kernel, which is used to produce palm kernel oil. Each palm fruit contains about 30-35 per cent oil. Palm fruit oil and palm kernel oil differ significantly in their fatty acid composition, but have the same botanical origin.

Provided by nature

The oil palm tree grows in regions around the equator. It is a tropical tree with leaves about 5 metres long. Originally found in West africa, the oil palm tree is now mostly cultivated in Indonesia and Malaysia, the world’s largest palm oil-producing nations.
From a tropical climate

Nature plays a big part in the palm oil story. What the tree loves above all, is sun and humidity. It thrives on plenty of sunshine, temperatures ranging between 24 and 32 degrees centigrade and rainfall evenly distributed throughout the year. Therefore, the most suitable areas for cultivation are located between ten degrees north and south from the equator. Apart from Indonesia and Malaysia there is an increase in palm oil production in other parts of the world including South and Central America, Thailand and Western Africa.
Did you know?
    Palm oil and palm kernel oil represent 38 per cent of the global vegetable oil production.
    62 million tons of palm oil is produced annually.
    One palm tree produces 40 kilogrammes of palm oil every year.
    One hectare of oil palm trees produce on average 3.8 tons of oil each year.
    Oil palm accounts for 7 per cent of all the cultivated land for vegetable oils globally, but has the highest output, producing 38 per cent of all oils and fats.
    Indonesia and Malaysia supply 85 per cent of the palm oil used globally.
    In Indonesia and Malaysia together, approximately 4.5 million people earn a living from palm oil.
    The use of palm oil in human nutrition dates back 10,000 years.

Other information:
Skype:sophia.zang1
Mobile:+86 158 3826 3507
Phone:+86-371-5677 1823
Website:www.palmoilextractionmachine.com
E-mail: palmoil@doingmachinery.com  chat online

Palm kernel oil refining machine /cooking oil refining process

Palm kernel oil refining process

Palm kernel oil refining machine /cooking oil refining process introduction:
Palm kernel oil refining processing line adopts advanced and scientific physical refining and totally stainless steel tank refining. Palm kernel oil is non-drying oil with low gum content, which is suitable for physical refinery. Fatty acid composes of 45%-51% lauric acid and 13%-25% cardamom acid. Palm kernel oil contains soap grade and food grade.

Palm kernel oil refining mahcine

Simple introduction of palm kernel oil refining:

● Decolorization. Whit clay makes continuously decolorization of crude palm kernel oil, and enters into filter for filtration.

● No need of degumming. Physical oil refining is applicable because of low gum content inside palm kernel oil.
● High vacuum deacidification. Gas supported heat-conducting oil boiler and packed tower make high vacuum deacidification from crude palm kernel oil.

● Fat acid Condensing recovery. Stainless steel recycled water is adopted to make direct condensing recovery of fat acid.

Other information:
Skype:sophia.zang1
Mobile:+86 158 3826 3507
Phone:+86-371-5677 1823
Website:www.palmoilextractionmachine.com
E-mail: palmoil@doingmachinery.com  

chat online

Small capacity palm oil production process machine

Small capacity palm oil production process machine:
Due to the planting structure influence, many Africa customer requires small capacity palm oil production process machine, while, in the international market, few company can do this small capacity palm oil production process machines, to solve this problem and help Africa customers, Doing company invented the small capacity palm oil production process machine recently.
Doing company small capacity palm oil production process machine has below capacities: 0.5t/h, 1t/h, and 2t/h.

Small capacity palm oil production process machine

For the 0.5t/h palm oil production process, the main process is:
FFB---Threshing---Sterilizing---Pressing---Filtration---CPO
For the 1t/h, 2t/h palm oil production process, it suits for the below steps:
FFB--- Sterilizing ---Threshing ---Pressing---Filtration---CPO

The difference of these two ways is the 0.5t/h palm oil production process thresh first, and then sterilize, and 1t/h, 2t/h palm oil production process will sterilize first and then thresh.
These two ways function is same, for different capacity, the steps is a little different. If you still have any questions about our mini capacity palm oil production process machine, just call us.




Other information:
Skype:sophia.zang1
Mobile:+86 158 3826 3507
Phone:+86-371-5677 1823
Website:www.palmoilextractionmachine.com
E-mail: palmoil@doingmachinery.com  
chat online

Palm fruit oil pressing production line /palm oil making mahcine

palm oil pressing machine production line

Henan Doing Company designs palm oil pressing machine production line to achieve crude palm oil from palm fruits and bunches. This type of self-sufficient palm oil making process adopts mature and reasonable design, assuring high capacity of crude palm oil, low energy consumption, low cost and low environmental pollution.

Palm fruit oil pressing production line introduction:

The Fresh Fruit Bunches(FFB) is available after 3 yeas plantation. Palm fruits are sent into crude palm oil processing plant with following production process:
●  Weighing. Transport palm fruit to factory after truck weighing so as to make prompt settlement and production cost subsequent.
●  Unloading fruit. Fresh Fruit Bunches (FFB) are sent to fermentation tank through transportation machinery after sieving and impurities removing. The time from picking up to fermentation should be less than 24 hours, or the free fatty acid(FFA) will rise, which will not be conductive for further processing and production of palm oil from palm oil making machine.
●  Fermentation. FFB will pass high pressure and high temperature sterilization after entering fermentation tank. It will soft and make sterilization for FFB.
●  Threshing. Threshing machine will separate both palm fruits and empty fruit bunches(EFB) after FFB soften duirng fermentation.
●  Empty fruit bunches (EFB). EFB are sent to send to garden as fertilizer, fuel or other purposes after conveying and hoarding.
●  Meshing. Mixing tank will mesh and crush palm fruit until broken after fruit threshing.
●  Pressing. The crushed palm fruit will be leaching out from screw extrusion of palm oil pressing machine.

Features of palm oil making machines:

● Low environment pollution palm oil milling production line. This palm fruit oil machine adopts process of sterilization, threshing, digesting, pressing, clarification, purification, drying, depericarper, crushing and final pressing. This mature design fulfills the lowest fuel consumption, steam driving, and self-sufficient energy supplying.

● Quality and performance reliable and stable oil making process. The design, manufacturing, and installation are all CE and ISO quality approval. Henan Doing Company owns rich experience in palm oil making machine designs more than 60 years and gets national patent certificates of multiple oil milling production lines.

Other information:
Skype:sophia.zang1
Mobile:+86 158 3826 3507
Phone:+86-371-5677 1823
Website:www.palmoilextractionmachine.com
E-mail: palmoil@doingmachinery.com  chat online

Palm Oil Processing machine/palm oil production line

Palm Oil Processing machine/palm oil production line introduction:
Palm oil processing gathering palm oil making, palm oil refining, and palm oil fractionation processing lines, ensures high efficiency and high oil yield of edible palm oil.

Palm oil processing mahcine

● Palm oil pressing machine provides high oil yield crude palm oil making from palm fruit and palm kernel.
● Palm oil refining machine enables high quality edible vegetable oil refining processing from crude palm oil efficiently.

Palm oil refining process machine

● Palm oil fractionation technology divides palm oil into liquid and solid oil by different welding points and different solution of various triglycerides composing oil.

Other information:
Skype:sophia.zang1
Mobile:+86 158 3826 3507
Phone:+86-371-5677 1823
Website:www.palmoilextractionmachine.com
E-mail: palmoil@doingmachinery.com  chat online

Palm oil mill process/palm oil processing machine for sale

 

Palm oil mill process

Palm oil mill process/palm oil processing machine introduction:
1.Palm oil mill process of bunch reception: as palm fruit unloading, cleaning, storage platform during palm oil mill processing, all hydraulic segmented discharge.
2.Palm oil mill process of sterilization: the use of high temperature to cook soft fruit bunches and sterilization, easy to separate fruit bunches, soft fruit, increasing the humidity of the fruit, it is easy to take the oil but also to make verification easier separation of the core-shell, preventing enzymatic decomposition, to avoid elevated levels of free fatty acids.
3.Palm oil mill process of threshing: strong vibrations through the fruit from fruit bunches separated.
4.Mashing. Mixing tank will mash and crush palm fruit until broken after fruit threshing.

Palm oil pressing machine

5.Palm oil mil process of pressing: There is also the steam heater in masher. The purpose of mashing is to separate the pulp and nut and crush the palm pulp. At the same time, the steam is used to cook the palm fruit and broke the cell of pulp. Because of cooking, sterilizing, threshing and mashing made the pulp soft and damage pulp cell structure, the palm pulp becomes soft and cell is broken. Then it is sent to continuous screw press. After pressing, oil palm fruit is divided into two parts: the mixture of oil, water and solid impurities, and the press cake (fiber and nut).The pulp stone separation obtained CPO and stone, press machine adopts the double screw helix continuous discharge and hydraulic, greatly improving production efficiency.

Other information:
Skype:sophia.zang1
Mobile:+86 158 3826 3507
Phone:+86-371-5677 1823
Website:www.palmoilextractionmachine.com
E-mail: palmoil@doingmachinery.com 
chat online

High quality palm oil production process /palm fruit oil making machine

High quality palm oil production process /palm fruit oil making machine introduction:

Palm oil production process

1.Weighing.Palm fruit into the factory after truck weighing,ease of production costing and after the settlement.
2.Loading ramp.FFB after a ramp sieved to remove impurities into the transport machinery delivery to sterilization tank.
3.Sterilization.The use of high temperatures to cook soft fruit bunches and sterilization (145 ℃ ,90-120 minutes), easy to separate fruit bunches fruit, soft fruit, increasing the humidity of the fruit.
4.Threshing.FFB has softened in sterilization process.After machine and screening beating off the fruit,palm fruit and empty fruit bunches (EFB) separation.
5.Empty fruit bunches.After delivery hoarding,EFB shipped orchard as fertilizer or fuel,it can also be used for other purposes.
6.Crushing.Fruit is broken through mash tank mixing and extrusion.
7.Pressing.The crushed fruit screw extrusion leaching by the press.


Other information:
Skype:sophia.zang1
Mobile:+86 158 3826 3507
Phone:+86-371-5677 1823
Website:www.palmoilextractionmachine.com
E-mail: palmoil@doingmachinery.com

chat online

Hot selling palm kernel oil refining processing line

Palm kernel oil refining machine

Hot selling palm kernel oil refining processing line introduction:
Palm kernel oil refining processing line adopts advanced and scientific physical refining and totally stainless steel tank refining. Palm kernel oil is non-drying oil with low gum content, which is suitable for physical refinery. Fatty acid composes of 45%-51% lauric acid and 13%-25% cardamom acid. Palm kernel oil contains soap grade and food grade.

Simple introduction of palm kernel oil refining:
● Decolorization. Whit clay makes continuously decolorization of crude palm kernel oil, and enters into filter for filtration.

● No need of degumming. Physical oil refining is applicable because of low gum content inside palm kernel oil.

● High vacuum deacidification. Gas supported heat-conducting oil boiler and packed tower make high vacuum deacidification from crude palm kernel oil.

● Fat acid Condensing recovery. Stainless steel recycled water is adopted to make direct condensing recovery of fat acid.

Other information:
Skype:sophia.zang1
Mobile:+86 158 3826 3507
Phone:+86-371-5677 1823
Website:www.palmoilextractionmachine.com
E-mail: palmoil@doingmachinery.com 

High efficiency crude palm kernel oil refinery plant

Palm kernle oil refinery plant

Main process of the Palm kernel oil refinery plant:
◆ Crude Palm kernel oil degumming process:Physical oil refining is applicable because of low gum content inside palm kernel oil.
◆ Crude Palm kernel oil deacidification/neutralization process:Gas supported heat-conducting oil boiler and packed tower make high vacuum deacidification from crude palm kernel oil.
◆ Crude Palm kernel oil decoloring/bleaching process:Whit clay makes continuously decolorization of crude palm kernel oil, and enters into filter for filtration.
◆Crude Palm kernel oil deodorization/distillation (deodorising unit) process
◆ Crude Palm kernel fractionation process

Palm kernel oil refinery plant featured advantages:
Palm kernel oil refining processing line adopts advanced and scientific physical refining and totally stainless steel tank refining. Palm kernel oil is non-drying oil with low gum content, which is suitable for physical refinery. Fatty acid composes of 45%-51% lauric acid and 13%-25% cardamom acid. Palm kernel oil contains soap grade and food grade.The process of Palm kernel oil refinery is to refine the crude edible oil, to remove gossypol, protein, phospholipid, grume, moisture and other impurities, in order to reach the purchase of food and storage.The process of palm kernel oil refinery includes mechanical refinery method, chemical refinery method and physical refinery process refinery process.

Other information:
Skype:sophia.zang1
Mobile:+86 158 3826 3507
Phone:+86-371-5677 1823
Website:www.palmoilextractionmachine.com
E-mail: palmoil@doingmachinery.com

Small scale edible oil refining plant | edible oil refining machine

High quality edible oil refining plant

Small scale edible oil refining plant Introduction:

Our small scale edible oil refinery plant are great choice for small capacity oil refinery machine.The small scale edible oil refinery production plant can remove phospholipids, FFA, pigment, gums, waxes, off-flavor and other impurities in the oil.

Small scale edible oil refining plant process flow:
Crude edible oil—–Degumming—–Neutralizing—–Decolorizing—–Deodorizing—–Fefined Edible oil

Small scale edible oil refining plant featured advantages:
◆This unit belongs to intermittent refining, with large and medium-sized batch refining equipment all the features, better than large and medium refining equipment,
◆The almighty one set of machine, easy to transport, small footprint, low operating personnel, energy conservation.
◆The set of small sets of oil refining edible oil equipment unit equipment by experts carefully designed and manufactured for various press hair oil, hair oil extraction outside the product oil, refined processed through this unit to improve oil quality and production of finished eating oil can meet the quality requirements of national standard grade cooking oil.


Other information:
Skype:sophia.zang1
Mobile:+86 158 3826 3507
Phone:+86-371-5677 1823
Website:www.palmoilextractionmachine.com
E-mail: palmoil@doingmachinery.com

Hot selling palm oil mill process machinery

Palm oil mill process machienry introduction:

Palm oil mill machinery

1.Palm oil mill process of bunch reception: as palm fruit unloading, cleaning, storage platform during palm oil mill processing, all hydraulic segmented discharge.

2.Palm oil mill process of sterilization: the use of high temperature to cook soft fruit bunches and sterilization, easy to separate fruit bunches, soft fruit, increasing the humidity of the fruit, it is easy to take the oil but also to make verification easier separation of the core-shell, preventing enzymatic decomposition, to avoid elevated levels of free fatty acids.

3.Palm oil mill process of threshing: strong vibrations through the fruit from fruit bunches separated.

4.Mashing. Mixing tank will mash and crush palm fruit until broken after fruit threshing.

5.Palm oil mill process of pressing: There is also the steam heater in masher. The purpose of mashing is to separate the pulp and nut and crush the palm pulp. At the same time, the steam is used to cook the palm fruit and broke the cell of pulp. Because of cooking, sterilizing, threshing and mashing made the pulp soft and damage pulp cell structure, the palm pulp becomes soft and cell is broken. Then it is sent to continuous screw press. After pressing, oil palm fruit is divided into two parts: the mixture of oil, water and solid impurities, and the press cake (fiber and nut).The pulp stone separation obtained CPO and stone, press machine adopts the double screw helix continuous discharge and hydraulic, greatly improving production efficiency.

Palm Oil Mill Plant Advantages:
◆Self-sufficient palm oil production, low production cost, low environmental pollution, recycling utilization of resource.
◆Palm oil mill plant adopts the most scientific palm oil processing equipment configuration, using mechanical oil pressing technology, make successfully extraction of palm oil from palm fruit.
◆Palm oil milling process plant covers three major plants of crude palm oil pressing plant, water treatment plant and power supply plant.
◆The entire palm oil process is totally environmental protective, low energy consumption, and low production cost.

Other information:
Skype:sophia.zang1
Mobile:+86 158 3826 3507
Phone:+86-371-5677 1823
Website:www.palmoilextractionmachine.com
E-mail: palmoil@doingmachinery.com

Palm kernel oil refining processing line popular in Malaysia

Palm kernel oil refining processing line adopts advanced and scientific physical refining and totally stainless steel tank refining. Palm kernel oil is non-drying oil with low gum content, which is suitable for physical refinery. Fatty acid composes of 45%-51% lauric acid and 13%-25% cardamom acid. Palm kernel oil contains soap grade and food grade.
 

Palm kernel oil refining machine

Simple introduction of palm kernel oil refining:

● Decolorization. Whit clay makes continuously decolorization of crude palm kernel oil, and enters into filter for filtration.

● No need of degumming. Physical oil refining is applicable because of low gum content inside palm kernel oil.

● High vacuum deacidification. Gas supported heat-conducting oil boiler and packed tower make high vacuum deacidification from crude palm kernel oil.

● Fat acid Condensing recovery. Stainless steel recycled water is adopted to make direct condensing recovery of fat acid.

Other information:
Skype:sophia.zang1
Mobile:+86 158 3826 3507
Phone:+86-371-5677 1823
Website:www.doingoilmachine.com
E-mail: oilmachine@doingoilmachine.com 

CE approved palm oil refining machine process line

Palm oil refining technology refers to conversion of crude palm oil to refined oil involves removal of products of hydrolysis and oxidation, color and flavor. Adopts scientific designed palm oil refining machine process line including degumming, deacidification, decolorization, blenching, deodorization to obtain high quality refined palm oil.
 

Palm oil refining machine

General introduction of palm oil refining processing line:

● Physical deacidification assures low consumption. Palm oil refinery adopts physical deacidificaiton process with high vacuum processing of fatty acids. It enables low palm oil loss in operation.

● High efficiency blenching. The addition of 90℃ phosphate and special rocky soil fulfill perfect decolorization of palm oil with high oil purity and brightness.

● Deodorization and blenching achieves final refined palm oil. Deodorization tank removes odor under heating and vacuum steam with vacuum pump. The blenching process finally gets refined palm oil with temperature of 33℃.

Other information:
Skype:sophia.zang1
Mobile:+86 158 3826 3507
Phone:+86-371-5677 1823
Website:www.palmoilextractionmachine.com
E-mail: palmoil@doingmachinery.com

High quality edible oil refinery plant | edible oil refining machine

 High  quality edible oil refinery plant | edible oil refining machine introduction:
Edible Oil Refinery Plants and Edible Oil Refining are of vital consideration when it comes to Edible Oil Industry. Our company not only manufactures unique oil refinery plants and systems for the Edible Oil Industry but also benefits the client as we are positioned to provide one stop solution for all the refining needs.

Edible oil refinery plant/edible oil refining machine

Our company is working to serve the edible oil refining needs by offering customized solutions. We manufacture and export cost effective Edible Oil Refinery Plants, Vegetable Oil Refinery Plants, Cooking Oil Refinery Plants, Edible Oil Mill Machinery and Oil Mill Plants. We personally own and operate a 30-TPD vegetable oil refinery plant and 40-TPD oil mill plant.

An entrepreneur can achieve good success in edible oil business if he has a perfect guidance from supplier who has a practical knowledge of running such vegetable oil refinery and oil mill plants. We have done successful installations throughout the world which has proven financial benefits to edible oil refiners and the edible oil business in general.

Come and visit our main manufacturing & export facility in India to ascertain our quality products or get in touch with us to find out more.

Other information:
Skype:sophia.zang1
Mobile:+86 158 3826 3507
Phone:+86-371-5677 1823
Website:www.edibleoilrefinerymachine.com
E-mail: oilmachine@doinggroup.com 

Gold supplier palm fruit oil pressing production line | palm fruit oil production process

Palm fruit oil processing process

Henan Doing Company designs palm oil pressing machine production line to achieve crude palm oil from palm fruits and bunches. This type of self-sufficient palm oil making process adopts mature and reasonable design, assuring high capacity of crude palm oil, low energy consumption, low cost and low environmental pollution.

Palm fruit oil pressing production line introduction:

The Fresh Fruit Bunches(FFB) is available after 3 yeas plantation. Palm fruits are sent into crude palm oil processing plant with following production process:
●  Weighing. Transport palm fruit to factory after truck weighing so as to make prompt settlement and production cost subsequent.
●  Unloading fruit. Fresh Fruit Bunches (FFB) are sent to fermentation tank through transportation machinery after sieving and impurities removing. The time from picking up to fermentation should be less than 24 hours, or the free fatty acid(FFA) will rise, which will not be conductive for further processing and production of palm oil from palm oil making machine.
●  Sterilizing. FFB will pass high pressure and high temperature sterilization after entering sterilizing tank. It will soft and make sterilization for FFB.
●  Threshing. Threshing machine will separate both palm fruits and empty fruit bunches(EFB) after FFB soften duirng fermentation.
●  Empty fruit bunches (EFB). EFB are sent to send to garden as fertilizer, fuel or other purposes after conveying and hoarding.
●  Meshing. Mixing tank will mesh and crush palm fruit until broken after fruit threshing.
●  Pressing. The crushed palm fruit will be leaching out from screw extrusion of palm oil pressing machine.


Other information:
Skype:sophia.zang1
Mobile:+86 158 3826 3507
Phone:+86-371-5677 1823
Website:www.palmoilextractionmachine.com
E-mail: palmoil@doingmachinery.com 

Palm kernel oil pressing machine | palm kernel oil press production line

Palm kernel oil pressing machine introduction:

Pam kernel oil pressing machine is different from palm fruit oil pressing processing line. Palm kernel oil contains lauric acid (C 12) with high saturation of 80%. Traditional palm oil indicates crude palm oil (CPO) pressed from palm fruit, and refined palm oil (RPO), not includes palm kernel oil.

Process flow chart of palm kernel oil pressing machine:
Palm kernel →Palm kernel crushing machine→Palm kernel and nuts shell separation machine→Palm kernel cooking machine→Palm kernel oil pressing machine

Palm kernel oil pressing process

Palm kernel oil pressing production line introduction:
● Palm kernel crushing machine. Crush palm kernels after softening and drying. The centrifugal crusher breaks nuts and separate palm kernel out completely.

● Palm kernel and nuts shell separation machine. Both dry and wet separations are available. Wet separation is mostly used in palm kernel separation, on basis of difference of relative density of palm kernel and shell.

● Palm kernel cooking machine. Fresh kernel contains 20% moisture. Palm kernel has no mildew during transportation and storage while moisture drops below 7%.

● Palm kernel oil pressing machine. Palm kernel oil pressing processing line is simple with usual oilseeds. The pre-pressing by oil pressing machine can obtain 1/4 palm kernel oil, and residual oil need twice pressing.



Other information:
Skype:sophia.zang1
Mobile:+86 158 3826 3507
Phone:+86-371-5677 1823
Website:www.palmoilextractionmachine.com
E-mail: palmoil@doingmachinery.com 

High quaity palm oil pressing production line

0.5tph palm oil pressing production line

Henan Doing Company designs palm oil pressing machine production line to achieve crude palm oil from palm fruits and bunches. This type of self-sufficient palm oil making process adopts mature and reasonable design, assuring high capacity of crude palm oil, low energy consumption, low cost and low environmental pollution.

Palm fruit oil pressing production line introduction:
The Fresh Fruit Bunches(FFB) is available after 3 yeas plantation. Palm fruits are sent into crude palm oil processing plant with following production process:
●  Weighing. Transport palm fruit to factory after truck weighing so as to make prompt settlement and production cost subsequent.
●  Unloading fruit. Fresh Fruit Bunches (FFB) are sent to fermentation tank through transportation machinery after sieving and impurities removing. The time from picking up to fermentation should be less than 24 hours, or the free fatty acid(FFA) will rise, which will not be conductive for further processing and production of palm oil from palm oil making machine.
●  Sterilizing. FFB will pass high pressure and high temperature sterilization after entering sterilizing tank. It will soft and make sterilization for FFB.
●  Threshing. Threshing machine will separate both palm fruits and empty fruit bunches(EFB) after FFB soften duirng fermentation.
●  Empty fruit bunches (EFB). EFB are sent to send to garden as fertilizer, fuel or other purposes after conveying and hoarding.
●  Meshing. Mixing tank will mesh and crush palm fruit until broken after fruit threshing.
●  Pressing. The crushed palm fruit will be leaching out from screw extrusion of palm oil pressing machine.


Other information:
Skype:sophia.zang1
Mobile:+86 158 3826 3507
Phone:+86-371-5677 1823
Website:www.palmoilextractionmachine.com
E-mail: palmoil@doingmachinery.com 

Palm oil processing process | screw palm oil expeller machine

Palm oil pressing machine

Process flow of palm oil pressing processing line:
Palm fruits through elevator and conveyors, enters into upper steaming boiler of oil press machine.
Stirring and heating with steam to destroy the emulsified state forming from oil and water, wherein the coagulation protein denaturation and to reduce the viscosity of the oil for further convenience of palm oil pressing process.
Digesting temperature keeps at 95-100℃ about 20 minutes.
Palm fruit after digesting enters into screw oil expeller for palm oil pressing.


Other information:
Skype:sophia.zang1
Mobile:+86 158 3826 3507
Phone:+86-371-5677 1823
Website:www.palmoilextractionmachine.com
E-mail: palmoil@doingmachinery.com  

High quality palm kernel oil refinery machine| palm kernel oil refining processing line

Palm kernel oil refinery machine

Palm kernel oil refinery machine introduction:
Palm kernel oil refining processing line adopts advanced and scientific physical refining and totally stainless steel tank refining. Palm kernel oil is non-drying oil with low gum content, which is suitable for physical refinery. Fatty acid composes of 45%-51% lauric acid and 13%-25% cardamom acid. Palm kernel oil contains soap grade and food grade.


Simple introduction of palm kernel oil refining:

● Decolorization. Whit clay makes continuously decolorization of crude palm kernel oil, and enters into filter for filtration.

● No need of degumming. Physical oil refining is applicable because of low gum content inside palm kernel oil.

● High vacuum deacidification. Gas supported heat-conducting oil boiler and packed tower make high vacuum deacidification from crude palm kernel oil.

● Fat acid Condensing recovery. Stainless steel recycled water is adopted to make direct condensing recovery of fat acid

Other information:
Skype:sophia.zang1
Mobile:+86 158 3826 3507
Phone:+86-371-5677 1823
Website:www.palmoilextractionmachine.comwww.palmoilextractionmachine.com
E-mail: palmoil@doingmachinery.com  

Palm Oil Fractionation Plant

Palm oil fractionation process

 Advanced oil fractionation equipment /palm oil fractionation plant Introduction:
Oil is a compound of many kinds of glycerol triester. Oil fractionation is the process of separating oil into different glycerol triesters at certain temperatures. Oil fractionation is a physical process, with no expensive or hazardous chemical additives, no chemical reaction, no loss and waste water. Oil fractionation is applied in processing palm oil, sunflower oil, cottonseed oil, rice bran oil, fish oil, lard oil, chicken oil etc.
Palm oil fraction is one of the most important application of the oil fraction process.

Palm fruit and palm kernel is a popular kind of material for making edible oil. The whole palm oil fractionation processing  plant/equipment has nine sections:

1. Raw materials storage section: Fresh palm fruit bunch must be first measurement recorded by the pound into the plant, then unloaded to loaded fruit slopes and stored.

2. Sterilizing section: fresh palm fruit bunch are airtight sterilized in sterilizer. The purpose to prevent enzymes broken down.

3. Threshing section: The purpose of threshing is the oil palm fruit be separated from the fruit bunch.

4. Pressing section: To get the crude palm oil from the palm fruit.
5. Clarification section: Machine-pressed crude oil first diluted with water washing, through settlement and filtration, the fiber material removed from the oil, and then carry out continuous settlement, the whole divided into two parts: oil and sediment.

6. Finished oil storage and transportation section: To store the finished oil.
7. Fiber separation section: Press cake broken by breaking screw conveyor and then transported into the fiber separation air net for fiber separating.
8. Kernel recovery section: Separating the kernel from the palm meal.
9. Sewage treatment section: If there is high requirement of the waste water, we need this section to treat the waste water.


Other information:
Skype:sophia.zang1
Mobile:+86 158 3826 3507
Phone:+86-371-5677 1823
Website:www.doingoilmachine.comhttp://www.doingoilmachine.com
E-mail: oilmachine@doingoilmachine.commailto:oilmachine@doingoilmachine.com 

Palm oil refining methods

Refining methods for palm oil refining:
There are two refining methods for the palm oil refining in the palm oil refinery plant. They are physical refining and chemical refining. Physical refining means removing gum in palm oil during process of degumming in special method and removing FFA in process of deodorizing by steam. Chemical refining, however, means removing FFA in a chemical way ( Acid-base neutralization). Gum and soap foot produced is separated by centrifuges.
 

Palm oil refining workshop

Palm oil refining - Chemical Refining
1.The finished oil is consistent and stable.
2.Excellent adaptability and less requirement to oil quality.
3.Less bleaching earth is added into compared with physical refining.
Palm oil refining - Physical Refining
1.High oil refining rate, less oil loss.
2.No waste water discharged.
3.Especially suitable for oils of high acid value, and low gum content.
4.More FFA distilled out.

Our palm oil refining plant is suitable for refining various crude vegetable oil, such as sunflower seed oil, soybean seed oil, groundnut oil, cottonseed oil, rice bran oil, corn germ oil and palm oil, etc.With Over 40 years/ experience of designing & installing & exporting complete edible oil refinery plant like palm oil refinery, we are now the leading company in edible / vegetable oil refinery field. We supply various edible / vegetable oil refining equipment and technology to ensure that best finished oil is achieved with the lowest production cost. If you'd like to get more information about our vegetable oil refinery plant, please don't hesitate to contact us. We are always at your service.

Other information:
Skype:sophia.zang1
Mobile:+86 158 3826 3507
Phone:+86-371-5677 1823
Website:www.palmoilextractionmachine.com
E-mail: palmoil@doingmachinery.com 

What is the purpose of palm oil refining?

Cooking oil refining machine

The purpose of palm oil refining :
Palm oil refining process refers to a series of refining processes that can remove phospholipids, FFA, pigment, off-flavor and other impurities in the palm oil. Palm oil refining process or vegetable oil refinery  is essential to ensure removal of gums, waxes, phosphatides and free fatty acid (F. F.A.) from the edible oil. To impart uniform color by removal of coloring pigments and to get rid of unpleasant smell from the palm oil by removal of odiferous matter.

Our palm oil refining plant is suitable for refining various crude vegetable oil, such as sunflower seed oil, soybean seed oil, groundnut oil, cottonseed oil, rice bran oil, corn germ oil and palm oil, etc.With Over 40 years/ experience of designing & installing & exporting complete edible oil refinery plant like palm oil refinery, we are now the leading company in edible / vegetable oil refinery field. We supply various edible / vegetable oil refining equipment and technology to ensure that best finished oil is achieved with the lowest production cost. If you'd like to get more information about our vegetable oil refinery plant, please don't hesitate to contact us. We are always at your service.


Other information:
Skype:sophia.zang1
Mobile:+86 158 3826 3507
Phone:+86-371-5677 1823
Website:www.palmoilextractionmachine.com
E-mail: palmoil@doingmachinery.com

Refinery palm oil process

Refinery palm oil process is mature technology in China. The purpose of refinery palm oil process is to removal the impurities to meet the standards of edible oil. And the refinery palm oil processes are: crude oil ---degumming bleaching---deodorization---fractionation. Steps of refining process of palm oil are as follows:

Palm oil refining process

First, put the crude oil into oil refining tank, stirring quickly, and simultaneously heating by steam. And then add the hot water. It is the most important stage , you should manage the water amount, temperature and water adding speed. At the same time, alkali is added to remove the FFA.

Next, Inhaling the definite quantity de-coloring agent (active clay, active carbon) into the oil by vacuum, then they are continue stirred and heated for  25mins. After pumping the oil and clay mixture into vibrating filter to remove the waste clay, the de-colorization is finished.

After the decolorized oil pumped to the deodorization pot or the deodorization tower, it’s begin to heat. When the temperature reaches above100℃, the direct steam is added to take the odors away.

After all of these, the palm oil should be cooled in vacuum cooling tank. When the temperature is nearly 80℃, it can be transferred  to another  container, then we got the refining palm oil.

After the refinery palm oil processes, the refining palm oil have different kinds of usages. It is edible oil, and also can be used for other purposes. It is widely used in food manufacturing and production, and the other 10% of the palm oil is mainly used in soap and oil chemical production. Besides, refining palm oil can also be used to make soap, vegetable oil, and other types of products.



Other information:
Skype:sophia.zang1
Mobile:+86 158 3826 3507
Phone:+86-371-5677 1823
Website:www.palmoilextractionmachine.com
E-mail: palmoil@doingmachinery.com   

Palm oil refining line

In the main producing countries such as Malaysia, Indonesia, Africa or the Southern American states in particular, palm oil is in demand not only as a raw material in the production of foods, cosmetics or cleaning agents, but also as an edible oil. In order to render the palm oil obtained edible, palm oil refining is needed to remove impurities.

Palm oil refining process

 Palm oil refining:
1.Filtration: The purpose of this step is to remove the granular impurities in palm oil.
2.Degumming: Pumping crude oil into oil refining tank, stirring quickly, and simultaneously heating by steam or heat-transfer oil(in coiled heater). Then add some hot water. You should control the water amount, temperature and water adding speed. If phospholipid lasts long suspended in oil, which is hard to gather to make flocculent precipitate. We can rise up the speed of adding water, conversely slow down. At the meanwhile, adding alkali to remove the FFA. For the batch type and semi-continuous type refinery, they will adopt precipitation separation method, continuous refineries will adopt centrifuge separation method.
3.Decolorization: Inhale definite amount of decoloring agent(floridin or acticarbon)into the oil, continuously stirring and heating for 25min. After that, pump the mixture of oil and floridin into filter to separate oil and floridin.
4.Deodorization: Pump and heat decolorized oil, when oil temperature reaches above100℃, injecting the direct steam to take the odors away. We can get refined palm oil, which is edible at this step.
5.Fractionation: This is very important process in palm oil refining, But before this step, we have get edible palm oil, in another word, if not for special usage, this step could be cancled in palm oil refining.

This is just a brief introduction about palm oil refining. If you need more information about palm oil refining ,please contact us .



Other information:
Skype:sophia.zang1
Mobile:+86 158 3826 3507
Phone:+86-371-5677 1823
Website:www.palmoilextractionmachine.comhttp://www.palmoilextractionmachine.com
E-mail: palmoil@doingmachinery.com   mailto:palmoil@doingmachinery.com

Crude palm oil refining machine

1. Machine type: crude palm oil refining machine
2. Material: crude palm oil
3. Capacity: 50-500T/D
4. Application: high efficiency oil refining from crude palm oil with low power consumption and high oil quality

Palm oil refining machine

• Introduction of crude palm oil refining machine:

Palm oil refining refers to conversion from crude palm oil to refined oil removing hydrolysis and oxidation products, color and flavor. We adopts scientific designed crude palm oil refining machine process line including degumming, deacidification, decolorization, blenching, deodorization to obtain high quality refined palm oil.
 

• General introduction of palm oil refining processing line:

1. Physical deacidification assures low consumption. Crude palm oil refining machine adopts physical deacidificaiton process. It enables low palm oil loss in operation.
2. High efficiency blenching. The addition of 90℃ phosphate and special rocky soil fulfill perfect decolorization of palm oil with high oil purity and brightness.
3. Deodorization and blenching achieves final refined palm oil. Deodorization tank removes odor by heat under vacuum The blenching process finally gets refined palm oil at 33℃.

Other information:
Skype:sophia.zang1
Mobile:+86 158 3826 3507
Phone:+86-371-5677 1823
Website:www.palmoilextractionmachine.comhttp://www.palmoilextractionmachine.com
E-mail: palmoil@doingmachinery.com  

Palm kernel oil expeller

Our palm kernel oil expeller is suitable for palm kernel oil extraction.
Doing Group is a leading palm kernel oil expeller machinery manufacturer which is specialized in pam kernel oil expeller, palm kernel crushing machine and other palm kernel processing machinery.
We design and manufacture palm kernel oil expellers for producing palm kernel oil. The palm kernel oil expellers comprise primarily the pressing stations, coupling, gearbox, pulley and belt, and motor.
 

Palm kernel oil machine

Features of palm kernel oil expeller machinery:
Easy to operate and maintain;
Large capacity;
Max oil yeild

If you are interested in palm kernel oil expeller machinery or want to know more about palm kernel oil expeller machinery, please do not hesitate to contact us.



Other information:
Skype:sophia.zang1
Mobile:+86 158 3826 3507
Phone:+86-371-5677 1823
Website:www.palmoilextractionmachine.comhttp://www.palmoilextractionmachine.com
E-mail: palmoil@doingmachinery.com 

Palm kernel oil refinery process

Palm kernel oil refinery process enjoys the same technology with other common oil refinery because the ingredinents of palm kernel oil has little difference with other oil. Our engineer can help you design palm kernel oil refinery process workshop based on customers' requirement.
Palm kernel oil refinery process devides into degumming, deacidification, decolorization, deodorization, which removes impurities(fatty acid, pigments, ordor, etc) from crude palm kernel oil. With these processes, palm kernel oil reaches food standard and has a longer shelf life.



Following is the picture of palm kernel oil refinery process workshop:
 

Palm kernel oil refining workshop

Main process of the Palm kernel oil refinery plant:

1. Crude Palm kernel oil degumming process,
2. Crude Palm kernel oil deacidification/neutralization process
3. Crude Palm kernel oil decoloring/bleaching process
4. Crude Palm kernel oil deodorization/distillation (deodorising unit) process

Palm kernel oil refinery process will refine crude kernel oil to high quality cooking oil.



Other information:
Skype:sophia.zang1
Mobile:+86 158 3826 3507
Phone:+86-371-5677 1823
Website:www.palmoilextractionmachine.comhttp://www.palmoilextractionmachine.com
E-mail: palmoil@doingmachinery.com   

Palm oil processing machines

Palm oil processing machines are similar with palm kernel oil processing machines, sunflower oil processing machines and cottonseed oil processing machines etc, the palm oil processing machines adopt the pre-pressed oil processing machines. The choice of palm oil processing machines and palm oil processing machines will effect oil quality, production consumption, oil yield etc, so it's very important to choose one advanced and reasonable palm oil processing machines with good combination of palm oil processing machines.
 

Palm oil extraction machine

Palm oil processing machines steps:
1.Oil extraction
Palm oil processing machines are solvent oil extractor, there are many different types; oil extraction tanks, rotocel oil extractor ,loop type oil extractor, towline oil extractor etc.
2. Wet meal desolventizing and drying
After oil extractor, wet meal contains about 25-35% solvent. In order to recover this solvent and get high quality meal , using high temperature steam to evaporate solvent .
3. Mixed oil evaporation and stripping
After oil extractor, mixed oil contains solvent , which need evaporate . Evapotation is using different boiling point between oil and solvent to make solvent transform into gas evaporated.
4. Solvent condensing and cooling
Use condenser to make the cake cool.

Other information:
Skype:sophia.zang1
Mobile:+86 158 3826 3507
Phone:+86-371-5677 1823
Website:www.palmoilextractionmachine.comhttp://www.palmoilextractionmachine.com
E-mail: palmoil@doingmachinery.com   

Palm oil mill plant

Our company is professional in manufacturing palm oil mill plant for years. We can offer the full palm oil production line and turnkey project.The complete palm oil mill plant include palm oil press production line ,palm kernel oil press production line and palm oil refining production line .

  Palm oil press production line of palm oil mill plant :

Palm oil press production line

1. Raw materials reception and storage

Workers pick fresh fruit bunches (FFB) , transport them to factory with cars, get the weight by Loadometer and discharge them to material platform which is specially designed for crude palm oil processing, laying up for latter process. Open the gate of discharging platform, FFB would fall down to the conveyor automatically and be sent to sterilizing section.
2.Sterilizing section
The function of sterilizing, known as stewing in high temperature, is to avoid the deterioration of fruit. This section can avoid the increase of palm oil AV by stewing the fruit about 60min with 300kPa steam in a specialized sterilizer.
3. Threshing section
The palm fruit proportion is about 60% of the FFB. In this section, we always use rotating drum thresher to separate palm fruit from the bunches.
4. Crashing
The purpose of crushing is to destroy palm skin, separate the palm pulp and nuts, pound palm pulp and to damage the cell structure of palm pulp by heating at the same time, which avail the latter pressing section.
5. Pressing
In crude palm oil processing, screw oil press is common equipment we use, the outcome of which is mixture of water, oil &residue and presscake (fiber cake).
6. Crude palm oil
Separate the fiber from the mixture derived from pressing by subsidence and filtration, after continuous subsidence we can separate oil and precipitate. With another filtration and vacuum drying, the oil is just crude palm oil as we say.
Other information:
Skype:sophia.zang1
Mobile:+86 158 3826 3507
Phone:+86-371-5677 1823
Website:www.palmoilextractionmachine.comhttp://www.doingoilmachine.com
E-mail: palmoil@doingmachinery.com 
 

How to begin a palm oil processing business plan？

To begin a palm oil processing business plan, it requires you clear about several basic information:

Palm oil pressing line

1, Raw material, whether your raw material is FFB(fresh palm fruit with bunches) or only palm fruit.
2, Capacity, how many tons of raw material you can get, and how many tons of raw material do you want to process.
For Doing company can provide the palm oil processing machine with capacity from 0.5t/h, 1t/h, 2t/h, 5t/h, 30t/h, 60t/h to 120t/h,
3, Raw material source, do you have your own plantation or you purchase the palm fruit from local market? For to make the profit maximization, it’s better to stable raw material supply.
4, Government permission, to install a oil plant, requires government permission, you need to prepare and apply in advance, for it takes long time, and Doing company can provide the docs you need.
5, Factory size and location, you need to confirm the factory size, and our engineer can help draw layout for you. Please also note, the factory should be close to the palm plantation.
6, Capital: it’s the necessary condition to install a palm oil processing business, for the whole processing line will be costly and need to prepare in advance. And Doing company can help you with the quotation.

Palm oil processing line

When everything above is clear, you can ask begin a palm oil processing business, and Doing company can also do the turn key project, if any problem about how to begin a palm oil processing business plan, just call us, Doing company will always offer you the best service, thanks!

Other information :
Skype:sophia.zang1
Mobile:+86 158 3826 3507
Phone:+86-371-5677 1823
Website:www.palmoilextractionmachine.comhttp://www.palmoilextractionmachine.com
E-mail: palmoil@doingmachinery.com